Home > Driveline, Axles & Brakes > Axles
Sort By:
Page of 1
Moser 28-35 Spline
Our Price: $370.00
Moser 40 Spline
Our Price: $465.00
Strange 40 Spline Solid
Our Price: $469.00

Moser Custom Alloy Axles begin with premium quality steel that is forged in Moser designed tooling, induction heat-treated to optimize torsional strength, and then 100% magnafluxed. This process not only gives the axle the strength of a "race only" axle, but makes it ideal for street use as well. The axles are specifically designed and engineered to take the stress and strain of both racing and high performance street uses. Moser axles are available in any spline count and can be made to fit virtually any rear end setup. All popular bearing sizes and bolt pattern combinations are available. If your futrure plans call for a narrower rear, Moser Custom Alloy Axles can be shortened and resplined to fit your needs.

Moser Custom Alloy 40 Spline Axles begin with premium quality steel that is forged in Moser designed tooling, induction heat-treated to optimize torsional strength, and then 100% magnafluxed. This process not only gives the axle the strength of a "race only" axle, but makes it ideal for street use as well. The axles are specifically designed and engineered to take the stress and strain of both racing and high performance street uses. Moser 40-spline axles can be made to fit virtually any rear end setup. All popular bearing sizes and bolt pattern combinations are available. If your futrure plans call for a narrower rear, Moser Custom Alloy Axles can be shortened and resplined to fit your needs.

Depended on by the fastest pro cars in the world! Strange Pro Race Axles are forged from"Hy-Tuf" steel that was originally developed for highly stressed landing gear in military aircraft. They are thru-hardened which allows for a drag racing shaft with exceptionally high tensile strength (240,000psi) while retaining ductility.
Pro race (Hy-Tuf) 40-spline gun drilled (.875"I.D.) axles, any length, choice of bolt circle, and with five 1.0" I.D. lightening holes machined into each axle flange. Tapped for 1/2" or 5/8" screw-in stud kit.(pair)

Depended on by the fastest pro cars in the world! Strange Pro Race Axles are forged from "Hy-Tuf" steel that was originally developed for highly stressed landing gear in military aircraft. They are thru-hardened which allows for a drag racing shaft with exceptionally high tensile strength (240,000psi) while retaining ductility.
Pro race (Hy-Tuf) axles, any length, any spline up to 35-spline. Choice of bolt circle. Plus axle bearings and 1/2" stud kit.

Lightweight axles
Depended on by the fastest pro cars in the world! Strange Pro Race Axles are forged from"Hy-Tuf" steel that was originally developed for highly stressed landing gear in military aircraft. They are thru-hardened which allows for a drag racing shaft with exceptionally high tensile strenght (240,000psi) while retaining ductility.

Pro race (Hy-Tuf) 40-spline gun drilled (.875"I.D.) axles, any length (maximum axle length 30"), choice of bolt circle, and with five 1.0" I.D. lightening holes machined into each axle flange. Tapped 5/8" screw-in stud kit.(pair)

Over 30 years experience, dedicated CNC equipment for axle production and complete heat treating capability are all factors that lead to Mark Williams being considered by many to be the best axles you can get. Available with MW 35 and 40-tooth splines, as well as all popular OEM splines.
Moser Extreme- 40 Spline
Our Price: $615.00

For those performance enthusiasts building sophisticated “Pro Street” type vehicles with narrowed rear ends, MW offers premium quality driveline components engineered specifically for daily street use, not “after market OEM” type axles. These are designed for those who want the BEST custom-made axles money can buy. MW “Pro Street” axles overcome the problem commonly encountered when using OEM or drag-type units: flange breakage. In fact, Mark Williams warrants each axle flange against breakage for two years when used in conjunction with 45mm MW housing ends and Timken® bearings. When building high powered street machines (which often weigh more and operate on more harsh surface conditions than their race-only cousins) it is important to increase the axle bearing and flange strength. Pricing is per pair.

If you are looking for a hi-performance axle that can withstand the most extreme horsepower demands, look no further. Introducing the hottest performance axle to hit the market: Moser Extreme. Moser Extreme is a 40 spline, star-flanged, gun-drilled axle manufactured out of premium quality allow steel, forged from Moser Engineering designed tooling, induction heat-treated to optimize torsional strength, and 100% magnafluxed. The axles feature a shaft size of 1.705" and oversized 1.774" bearing seats. The Moser Extreme performance axle is made to withstand tremendous horsepower, which enables the serious racer the ability to upgrade to a bigger premium shaft and not add all the weight. In fact, the Moser Extreme performance axle is lighter than a standard 33 spline axle. The Moser Extreme can be splined to fit any manufacturer's spool and carries a standard 10 year limited warranty. Sold per pair

Lightweight axles
Depended on by the fastest pro cars in the world! Strange Pro Race Axles are forged from"Hy-Tuf" steel that was originally developed for highly stressed landing gear in military aircraft. They are thru-hardened which allows for a drag racing shaft with excptionally high tensile strenght (240,000psi) while retaining ductility.
Pro race (Hy-Tuf) 35-spline gun drilled(.875 I.D.) axles, any length (maxium 35-spline gun-drill length is 20"), choice of bolt circle, and with five 1.0"I.D. lightening holes machined into each axle flange. Package includes axle bearings and 5/8" stud kit.

Lightweight axles
Depended on by the fastest pro cars in the world! Strange Pro Race Axles are forged from"Hy-Tuf" steel that was originally developed for highly stressed landing gear in military aircraft. They are thru-hardened which allows for a drag racing shaft with exceptionally high tensile strength (240,000psi) while retaining ductility.
Pro race (Hy-Tuf) 40-spline gun drilled (.875"I.D.) axles, any length (maximum axle length 30") choice of bolt circle, and with five 1.0" I.D. lightening holes machined into each axle flange. Package includes A1019 axle bearings and 5/8" stud kit.

SUPER-LIGHT “ HI-TORQUE” AXLES - For the ultimate in weight savings, Mark Williams has introduced the SUPER-LIGHT “HI-TORQUE” axle. In an effort to reduce reciprocating weight, these axles have the gun drilled bore enlarged to 7/8” along with extensive milling of the axle flanges. This in conjunction with the additional machining behind the MW name plate and revised axle profile result in a weight savings of 29% over the standard gun drilled MW axles. 35 spline super-light axles can be used for cars weighing up to 1800 lbs while 40 spline super-light axles are recommended for vehicles over 1800 lbs. Pricing is per pair.

Ultimate “ 300M HI-TORQUE” AXLES - For the ultimate in weight savings, Mark Williams has introduced the Ultimate “HI-TORQUE” axle. By using aircraft grade 300M forgings with higher tensile strength properties allow a reduction in reciprocating weight, these axles have the gun drilled bore enlarged to 1” along with extensive milling of the axle flanges. Additional machining behind the MW name plate and revised axle profile result in a weight savings of 36% over the standard gun drilled MW axles (17.3lbs). These axles are available only in 40 spline configuration. Pricing is per pair.

Mark Williams 40 spline axles, 5" bolt pattern, hubs with bearings, drive plates, axles, MW calipers, caliper mounts, rotors, floater spindles, studs, lug nuts and washers.