The Elite Mega Panel switch panel brings you the same performance and reliability of our Mega Panel with the addition of our NEW Elite Relay Board! The sleek and compact Switch Panel is the main part of the system and includes 6 labeled switches to control your car's most important functions. The unique starter button and premium grade switches combine a new age design with functionality. The ignition and fuel pump switches are dual position switches while the Fan/Water Pump, Head light/Tail light, and Aux 1/Aux 2 are all three position switches. It is made to easily fit into a dragster's dash (door car/roadster mounting kits soon to come) with the overall size similar to the overall size of the conventional switch panel. To simplify the wiring process, the Switch Panel plugs into our Elite Relay Board using the supplied heavy duty cable. The Elite Relay Board is the "power distribution board" and was built with durability in mind. It is capable of handling a 100amp load with the supplied 6 gauge wire. It also includes dedicated relays for each switch, with each relay including its own status indicator light to let you know which circuit is on, and a dedicated fuse assigned to it. The Elite Relay Board can handle up to 40 Amps. on any output. In the very unlikely event that even more current is required, two outputs can be connected together for up to 80 Amps. The Elite V10 Relay Power Board has an extra high current Shift Output. To keep cock style shifters solenoids from being hot when not in use, the shift output is only active when the Ignition switch is on. The Shift Output Controller allows the driver to select whether to shift on time or RPM using a remotely mounted Select Switch (usually mounted on the dash). The Elite Relay Board also has three slide switches. An Output Control Switch to control whether the shift output will apply +12 volts (N.O.) to shift or remove +12 Volts (N.C.) to shift and two Input Selector Switches used to tell the Elite Relay Board whether +12 Volts or ground is coming from the Shift Controllers. The Relay Board also includes the "Dual Select" feature, which allows you to individually customize how the Auxiliary and the Headlight/Taillight three position switches work. For example; the switch on the Mega Panel Labeled Headlight/Taillight turns on the Headlights in one position and the Taillights in the other position. However by turning ON the Dual Select dip switch located on the relay board, you can change it so that the Taillight only is on in the Taillight position and when the switch is in Headlight position the Headlights and the Taillights come on together. The Wiring Kit includes enough color coded wire, connectors, wire ties and a complete color coded diagram to help you neatly wire a vehicle.